在使用電動扭剪扳手時，為避免火災、電擊、受傷及機械損傷等意外事故，建議嚴格遵守以下安全規程。
When using an electric torsion wrench, in order to avoid accidents such as fire, electric shock, injury, and mechanical damage, the following safety regulations must be strictly followed.
1電源電壓不超過電動扭剪扳手銘牌上額定電壓的 10%。
The power supply voltage shall not exceed 10% of the rated voltage on the nameplate of the electric torque wrench.
2扭剪扳手使用的電源插座建議與電動扳手上的電源插頭相匹配，輸入側電源(拖線盤)建議裝有漏電保護器。
The power socket used for the 2 torsion wrench must match the power plug on the electric wrench, and the input power supply (cable tray) must be equipped with a leakage protector.
3扭剪扳手機體、電線、漏電保護器建議完好。
3. The body, wires, and leakage protector of the torsion wrench must be intact.
4在高處作業時，電動扭剪扳手建議系好安全繩。
When working at heights, the electric torsion wrench must be tied with a safety rope.
5不得在潮濕或被雨淋到的地方使用，不得在存放易燃、易爆氣體的地方使用。
5. Do not use in damp or rainy areas, and do not use in places where flammable and explosive gases are stored.
6 正確選用合適的套筒。
6. Choose a suitable sleeve correctly.
7操作時，應按規范穿戴工作服、安全帽、安全帶，身體要保持平衡。
During operation, work clothes, safety helmets, and seat belts should be worn according to regulations, and the body should maintain balance.
8不得拉扯扭剪扳手上的導線,不得用拉導線的方法來拔插頭。
Do not pull the wire on the torsion wrench, and do not use the method of pulling the wire to pull out the plug.
9 使用完畢，拔掉電源插頭。
9. After use, unplug the power plug.
