萬中x30J扭剪扳手適用于m16-30六種國標扭剪螺栓
Wanzhong x30J torsion shear wrench is suitable for m16-30 six national standard torsion shear bolts
扭剪扳手主要是終緊扭剪型高強螺栓的，它的目的就是把扭剪型高強螺栓的梅花頭打斷即可。工作時將扳手頭對準螺栓頭，扣動開關即可開始工作，幾秒后，螺栓梅花頭將被扭斷，然后抽出扳手扣動扳機將梅花頭彈出，即結束工作。
The torsion wrench is mainly used for final tightening of torsion shear high-strength bolts, and its purpose is to break the plum blossom head of the torsion shear high-strength bolt. When working, align the wrench head with the bolt head, press the switch to start working. After a few seconds, the bolt ring head will be twisted and broken. Then, pull out the wrench and pull the trigger to eject the ring head, which ends the work.
Thank you for reading. The source of this article is the wrench for torsion shear bolts. For more information and questions, please click on: http://m.lvhe888.com We will continue to work hard to provide you with services. Thank you for your support!
