為避開使用電動扭剪扳手時發生火災、觸電、人身損害、機械損害等事故，使用電動剪切鉗時須嚴格遵守以下平安規定。
To avoid accidents such as fire, electric shock, personal injury, mechanical damage, etc. when using electric shear wrenches, the following safety regulations must be strictly followed when using electric shear wrenches.
電源電壓不得超過電動扳手銘牌上額定電壓的10%。
The power supply voltage shall not exceed 10% of the rated voltage on the nameplate of the electric wrench.
扳手使用的電源插座須與扳手上的電源插頭匹配,輸入側的電源(電纜托架)須配備漏電愛護器。
The power socket used for the wrench must match the power plug on the wrench, and the power supply (cable tray) on the input side must be equipped with a leakage protector.
電動扭剪扳手的本體、電線和漏電愛護器須完好無損。
The body, wires, and leakage protector of the electric torsion wrench must be intact and undamaged.
高空作業時,扳手須系上平安繩。
When working at height, the wrench must be tied with a safety rope.
不允許在潮濕或雨天使用,或在儲存易燃易爆氣體的地方使用。
It is not allowed to use it in damp or rainy days, or in places where flammable and explosive gases are stored.
使用時應正確選擇合適的套筒。
Proper selection of sleeves should be made during use.
根據要求穿戴工作服、平安帽和平安帶,以在操作過程中保持身體平衡。
Wear work clothes, safety helmets, and safety belts as required to maintain body balance during operation.
不要拉動扳手.上的鋼絲，也不要通過拉動鋼絲來拉動插頭。
Do not pull the wire on the wrench, nor do you pull the plug by pulling the wire.
使用后，準時拔掉電源插頭。
After use, unplug the power plug promptly.
This article is written by the manufacturer of torsion wrenches. For more products and detailed exciting content, please follow our website: http://m.lvhe888.com We will present more content for you.
